Miniature Photoelectric sensors amplifier built-in reflective sensor distance measuring sensor

Part Number CX-411
Features product upgrade manufacturing people and the planet more harmonious sensor
Detection distance 10m
Sensing object φ12mm more opaque
(Note): If you installed the slit mask (sold separately), can detect small objects φ0.5mm (with a circular slit mask).
Hysteresis (hysteresis) -
Repeatability (perpendicular to sensing axis) 0.5mm or less
Power supply voltage 12 ~ 24V DC ± 10% Ripple P-P10% or less
Current consumption Emitter: 15mA or less
Optical receiver: 10mA or less
Output NPN open-collector transistor
? Maximum sink current: 100mA
? Applied voltage: 30V DC or less (between output -0V)
? Residual voltage: 2V or less (at 100mA sink current), 1V or less (at 16mA sink current)
Output: Output operation selector switch is available when the Light ON / Dark-ON
Output: short circuit protection with
The reaction time 1ms or less
Operation indicator Orange LED (lights up when output ON) located on the light receiving device
Stability indicator green LED (Light-steady, non-steady light when the lights) located on the light
Power indicator Green LED (lights up when powered) located on the emitter
Sensitivity adjuster Continuously variable adjuster is mounted on the transmission type sensor optical receiver
Anti-interference function [with anti-interference filter (sold separately), 2 sets of sensors can be mounted close together (detection distance: 5m)]
Environmental resistance: Protective structure IP67 (IEC), anti-immersion type (JIS)
Environmental resistance: Ambient temperature -25 ~ + 55 ℃ (No dew condensation or icing allowed), Storage: -30 ~ + 70 ℃
Environmental resistance: Operating Humidity 35 ~ 85% RH, storage time: 35 ~ 85% RH
Environmental resistance: Ambient illumination Incandescent: 3,000lx less affected by surface illumination
Environmental resistance: resistance to voltage AC1,000V 1 between all supply terminals connected together and enclosure
Environmental resistance: insulation resistance between all supply terminals connected with the housing, 20MΩ, or more, of DC250V megger
Environmental resistance: resistance to vibration frequency 10 ~ 500Hz double amplitude 1.5mm (MAX.10G) XYZ directions for two hours each
Environmental resistance: resistance to impact frequency 500m / s2 (about 50G) XYZ 3 times each direction
Emitting element (modulated) Red LED
Emitting element (modulated): Emission peak wavelength of 680nm
Materials Case: PBT (polyethylene terephthalate)
Lens: Acrylic
Display cover: Acrylic
0.2mm2 3-core cable (emitter: 2-wire) rubber cable, length 2m
0.3mm2 cables extend over the entire length of the cable may be extended to 100m (emitter and the light receiver each one)
Weight Net Weight: about 95g
Package weight: about 100g
Accessories -